8
User's Manual |
KS-SD
Chapter 1
Power button with LED (Green)
Press to power on or power off the system.
Reset button
Press to reset the system.
HDD LED (Red)
Indicates the status of storage devices (including the mSATA card) as below.
Status LED (Orange)
Indicates system status as below.
Status LED
ACPI States
Powered-On
Standby/Sleep
Hibernate/
Soft off
LED Behavior
Always ON
Blinks
Off
Remote power-on/power-off switch connector
Connects a distant power on/off switch.
COM Ports
All COM ports can be selected among RS232, RS422 and RS485 via jumper settings.
In addition, COM1 and COM2 can be selected between standard RS232 and RS232 with
power via jumper settings.
Getting to Know the KS-SD
Chapter 1
Bottom View
Top View
DC-in
DC 9~36V power input via a terminal block connector.
DVI-D (DV-I connector)
Connects the DVI-D connector of an LCD monitor.
HDMI (or DP, optional)
Connects the HDMI connector of an LCD monitor.
USB 3.0 Ports
Connect USB 3.0 devices as well as devices based on previous USB versions.
Gigabit LAN Ports
Connect the system to a local area network.
VGA Connector
Connects the VGA connector of a monitor.
HDD LED
HDD State
Disk access
activity
Disk drives present or not present
LED Behavior
Blink
Off
COM 2
Power Button
(1)
(Green LED)
Reset Button
COM 3
COM 4
Status LED (Orange)
HDD LED (Red)
COM 1
Remote Power-on
Switch
DC-in
DVI-D
(DVI-I connector)
LAN 1 LAN 2
VGA
USB 3.0
HDMI (optional)
