38
User's Manual |
KS-SD
Chapter 7
Debug Configuration
This section configures the debug function.
ME Configuration
This section configures flashing of Intel
®
Active Management Engine region.
Me Fw Image Re-Flash
Enable or disable flashing of the Intel
®
ME region.
Dynamic EFI Debug
Enable or disable output of the log messages for debugging through a serial port.
If you select to enable this function, please set a serial port for this purpose with the
following parameters:
EFI debug print level
Shows desired print level for displaying different type of log messages. The options are
as follows:
0x00000001: Display messages of system initialization
0x00000002: Display warning messages
0x00000004: Display messages of Load events
0x00000008: Display messages of EFI File system
0x00000040: Display informational debug messages
0x80000000: Display Error messages
0x8000004F: Display all types of messages shown above
EFI Debug serial port
Shows the serial port number for message output: COM1 (0x3F8)
EFI Debug baud rate
Enter or choose the baud rate for serial communication. The default is 115200.
