10
User’s Manual |
KS-SD
Chapter 2
Chapter 2 - Getting Started
Chapter 2
Preparing the System
Before you start using the system, you need the following items:
•
SATA hard drive
•
Any means of power supply
•
Memory module
•
Screwdriver
Installing Devices
The following devices can be installed in the system.
•
Memory module
•
SATA hard drives
•
Mini PCIe and mSATA cards
Configuring the BIOS
You may need to change configurations such as the date, time and settings of devices in
the system before you install an operating system or deploy the device in your operating
environment.
1. Power on the system.
2. After the memory test, the message “Press DEL to run setup” will appear on the
screen. Press the Delete key to enter the BIOS setup utility.
Installing an Operating System
Most operating system software can be installed using a DVD or bootable USB drive. Be
sure to install a storage device.
1. Refer to the following chapters for information on installing a SATA drive or an
mSATA card.
2. Refer to your operating system manual for instructions on installing an operating
system.
Installing the Drivers
The system requires you to install drivers for some devices to operate properly. Refer to
the Supported Software chapter for instructions on installing the drivers.
