13
User's Manual |
GM341-GHF
Chapter 3
The system (only with the V1000-series CPUs) has one M.2 type 2280 socket (M Key), which
provides PCIe NVMe x2 interface that supports the installation of M.2 22 x 80mm SSD cards:
1. Align the notch at the edge of the M.2 card with the key in the connector.
2. Push down on the other end of the card and use the provided mounting screw (the longer
one) to secure both cards on the system board.
The system board is equipped with two SATA 3.0 ports that support the installation of SATA DOMs
that can be used as a boot drive, system backup and recovery device, etc.
These SATA ports provide power so external power supply is not needed. However, if such power
supply is required, the board is equipped with a 2-pin 5V/2A DC-out connector. Align the SATA
port with the connector of a SATA DOM before inserting the SATA DOM.
Installing a SATA DOM
Installing an M.2 card
M.2 module
M.2 module
SATA DOM
DC-out