12
User's Manual |
GM341-GHF
Chapter 3
Removing the Chassis Cover
Please observe the following guidelines before opening the chassis cover:
1. Make sure the system and all other peripherals connected to it have been powered off.
2. Disconnect all power cords and cables.
3. The mounting screw on the rear side of the system compartment is used to secure the cover
to the chassis. Remove this screw and put it in a safe place for later use.
4. Use the key (push it down slightly and turn it counterclockwise) to unlock the system com-
partment cover.
5. Slide the cover backward to open the chassis cover.
Installing the SODIMM
Grasp the module by its edges and align the memory’s notch with the socket’s notch;
then insert the memory into the socket at an angle and push it down until you feel a
click.
Notes:
1. The system supports dual-channel configuration. To enable dual-channel,
populate both SODIMM sockets.
2. The SODIMM sockets can only accept DDR4 (3200MHz) memory modules.
Please do not install other types of memory modules.
DDR4_1 Socket
DDR4_2 Socket
SODIMM modules
Mounting screw
Compartment lock