36
SECTION 6
SET-UP AND ADJUSTMENT OF
OPTIONS
YOUR STEADYWEB CONTROLLER OPTIONS HAVE BEEN PROPERLY SET UP AT THE
FACTORY. IT SHOULD NOT BE NECESSARY TO MAKE ANY CHANGES. USE THE
INFORMATION IN THIS SECTION TO VERIFY THE SET UP OR TO MAKE MODIFICATIONS IF
YOUR REQUIREMENTS CHANGE.
6.0 220 VOLT POWER INPUT (See Page 6 for description)
Refer to Section 5.3 for correct set-up procedure.
6.1 24 VOLT OUTPUT (Version 12V controller only, see Page 6 for description)
Refer to Section 5.7 for correct set-up procedure.
6.2 45 VOLT OUTPUT (Version 12V controller only, see Page 6 for description)
Refer to Section 5.7 for correct set-up procedure.
6.3 DC TACHOMETER CARD (See Page 6 for description)
This card is only used in conjunction with the Taper option, the speed-actuated Soft Start feature, or
Speed Follow. It is plugged into the RIGHT hand option socket on the Power board. The left socket is
for special cards, if used.
Figure 26
- DC TACH OPTION CARD
There are two +10 volt DC outputs on the card, named LTACH and RTACH. Both are needed for
the Taper option, but only LTACH is needed for the speed-actuated Soft Start function. LTACH
refers to the line (machine) speed tachometer. RTACH refers to the rewind roll speed tachometer.
Summary of Contents for SteadyWeb
