44
44
MAIN SYSTEM
Connect and set up signals and sensors
It is possible to directly measure ±10 V or to use MSIs to expand the input signal possibilities. Open the Data Channel
List by double clicking/tapping on the menu tab on the right side or by swiping it over the whole measurement screen,
seen in Figure 2.
Figure 2
An analog signal of ±10 V or an MSI can simply be connected to the input. A preview of the signal is shown in the
corresponding channel row (see Figure 3) and the MSI will get recognized automatically. This can be seen in the
graphical overview, seen in Figure 3.
Figure 3
Summary of Contents for PUREC
