DewertOkin ID21, Installation Instructions Manual

Page: 3 / 96

System ID21
78438 7.0 3
Document revision history
Version Date Modification, change
(-) 07/2011 First release
(a) 05/2015 Control keypads, control
units
(b) 01/2016 Note for Reset
(c) 03/2017 DESKFRAME C ID-A 30x30-3L
(d) 05/2017 DESKFRAME C ID-A 40x40-3L
6.0 11/2018 Edition II
7.0 07/2019 Control unit SMARTneo (pro)
Disclaimer and exclusion of liability
DewertOkin is not responsible for damage resulting from:
•
failure to observe these instructions,
• changes made to this product which have not been approved by DewertOkin, or
• the use of replacement parts which have not been approved or manufactured by DewertOkin.

We reserve the right to make unannounced technical changes in the course of our continual
product improvement process!
Creation of a complete operating instruction manual for the entire end
product
These instructions are only intended to be used by the end-product manufacturer. They should
not be given to the operator of the end product. The factual information contained within may
be used as a basis when creating the end-product manual.
The warning and danger notices are best suited for use in the end product's manual. However
it is not sufficient to simply follow these notices. You should also carry out an internal risk as-
sessment for your end product. This can then be used as the basis for the safety notices in
your manual.
These installation instructions do not contain all information required to safely operate the end
product. They only describe the installation and operation of the drive as partially completed
machinery.
The instructions are intended for the technicians responsible for manufacturing an end product
and not for the operators of the end product.