DewertOkin ID21, Installation Instructions Manual

Page: 46 / 96

Installation System ID21
46 78438 7.0
5.6.2 COMPACT control unit
The COMPACT control unit can be equipped with a protective mechanism. A sensor unit (sensor
and processor) can be mounted under the tabletop between the table frames.

The sensor is attached to both the table frame and the tabletop. The contact point with the
tabletop is marked with a yellow dot, as shown in Figure 43.
Figure 43 Sensor unit
A Sensor B Connecting cable (for connection to processor)
C Connection for the sensor cable D Processor
E Connecting cable for control unit
NOTICE
This protective mechanism only works when the sensor is correctly installed. Make sure that the
side of the sensor marked with a yellow dot is facing the tabletop.
CAUTION
• You should only install and remove the sensor when it is completely disconnected from any
live current!
•
This safety mechanism is not effective unless the drilled holes are aligned exactly with each
other. Personal injury and property damage can result from improper alignment.

The screws are not included in our delivery.
D
C
E
B
A