System ID21
Operating the control keypads
78438 7.0
69
8.10.2 Advanced functions
Saving a position
Any table position can be saved using this function.
When the control unit is turned on for the first time, all positions are equal to the smallest table
position (the lower end position).
Only one table position can be stored per memory key.
To save a position, proceed as follows:
1
Move the table to the position that you want to save.
The position is shown on the display (e.g. 125 cm).
2
Press the Save key.
5 -
S –
is now shown on the display.
3
Press the desired memory key (e.g. 2).
5 2
S 2
is shown on the display.
4
The set table position is now saved for the selected memory key.
A double-click noise can then be heard. After about 2 seconds, the saved
table position is displayed.
Adjusting the table to a saved height position
This function allows you to set the table to a saved table position.
1
Press and hold the memory key that corresponds to the desired table
position (e.g. position 2).
The table will move as long as the memory key is pressed. If you
release this key before the saved position is reached, the table will
stop before it reaches this position.
2
Release the key when the table has reached the saved position.
The current (saved) position is shown on the display.
Summary of Contents for ID21
Page 1: ...Installation Instructions Translation of the original installation instructions System ID21 ...
Page 2: ......
Page 94: ......
Page 95: ......