7
4.
Fitting
Included in the supply package is the
and
, a
or a
and one or two slave drives. The components are prewired
and receive plugs/ready to plug in.
If the optional
system is part of the order, it is already attached and
connected to the drive at the factory.
When
, take care
of the battery backup system.
During
take care not to activate a function on the handset inadvertently the
could otherwise cause the drive to
!
drive
depending on the order a handset
locking device
supervisor
battery back up
unpacking
not to damage the cable
Caution the battery backup system contains a residual charge!
installation
residual charge
operate
a)
Installation
Applying slight force, pull out engaged
until
for the linkage levers are
exposed.
the
with the
onto the
. Note: this is only
possible, however provided the application has travelled to the
.
Slide the
back again until they engage.
closer (1)
receivers (2)
Push
DUOMAT 7
receivers (2)
mounting (3)
starting (home) position
closer (1)
DUOMAT 7
(1)
(1)
DUOMAT 7
(1)
(1)
(2)
(2)
DUOMAT 7
Application
(2)
(2)
(3)
(3)
Caution!
Only ever connect or disconnect electrical components when they are voltage-free.
