21
EC Manufacturer’s Declaration
The Manufacturer:
hereby declares that the drive system described below
is not a ready-to-use machine in keeping with the EC Machines Directive and, therefore,
does not fully comply with the requirements of the Directive!
This machine may not be put into operation until conformity with the above Directive of the
entire machine, into which it is to be installed, has been declared!
Partially applied harmonized standards:
Safety of Machines, Guiding Technical Principles
Kirchlengern, 22th October 2007
Andreas Roither
Managing Director R&D and Engineering
According to Appendix II B of the EC Machines Directive (98/37/EG)
DEWERT
Antriebs- und Systemtechnik
Weststr. 1
32278 Kirchlengern
Germany
DUOMAT 7
CARE L/HOSP L
EN 292-2
GmbH
EN 292-1
Safety of Machines, Basic Terminology, Methods
