1.
Designated Use
Caution!
2.
Prerequisites
The
drive system is
for installation in beds …
for the motorized adjustment of moveable bed parts using original DEWERT fittings
and accessories.
in the proximity
-
,
in an environment where
or
gases or vapours (e.g.
anaesthetics) are likely to occur,
in a damp
In the case of the CARE und HOSP versions only the standards expressly listed in the
Additional Information (Page 23/24) have been correspondingly applied. In as far as
standards/requirements to the end product must take additional measures to ensure that
these are met.
The installation steps described in these instructions must be performed by a
.
This being the case, you should never carry out this work
unless you are a
or
you should
this work to suitably
only.
Conformity according to EC Directives
The drive system is supplied ex factory as a machine
in accordance with
the EC "Machines" Directive. In other words, you may not put the drive system into operation
until you have met the safety objectives of the
The drive system meets the safety objectives of the EC Directives concerning "
and
DUOMAT 7
designed
high frequency surgical equipment and defibrillators
inflammable
explosive
fully trained
electrical engineer
yourself
qualified electrical engineer
entrust
qualified persons
not ready for use
Low
voltage"
"Electromagnetic Compatibility (EMV)".
!
!
!
!
!
!
!
!
for the disabled
for the hospital sector
DUOMAT 7
not intended for use
Declaration of Conformity
(CARE L version),
(HOSP L version),
The
drive system is
...
environment, i.e. outdoors nor in beds intended for cleaning in wash
tunnels
"Machines" Directive and issued a
corresponding
!
3
