background image

7

English

Powerhead (Fig. B)

 

WARNING: 

To reduce risk of injury:

•  Before any use, be sure everyone using this product 

reads and understands all safety instructions and 
other information contained in the powerhead and 
attachment manuals.

•  Never apply power without an attachment being 

properly mounted to the powerhead.

 

WARNING: To reduce the risk of serious personal 

injury, turn unit off and remove the battery pack 

before making any adjustments or removing/

installing attachments or accessories.

 An 

accidental start‑up can cause injury.

 

WARNING:

 This string trimmer attachment is to be 

used only with 

D

e

WALT

 powerheads.

Your string trimmer is designed such that the powerhead can 

separate from the string trimmer attachment by turning the 
knob 

 4 

 counterclockwise, depressing the latching button 

 6 

  

and gently pulling them apart by their poles 

 1 

 5 

.

This should only be done with the power switch off and the 
battery pack removed. Inside the upper powerhead pole 

 5 

 

is a mechanical coupling that will spin if the powerhead is 
turned on. This coupling can cause severe injury if contacted 
while the powerhead is operating.

ASSEMBLY AND ADJUSTMENTS

 

WARNING: To reduce the risk of serious personal 

injury, turn unit off and remove the battery pack 

before making any adjustments or removing/

installing attachments or accessories.

 An 

accidental start‑up can cause injury.

The label on your tool may include the following symbols. The 
symbols and their definitions are as follows:

V ......................... volts
Hz .......................hertz
min .....................minutes

 or DC ......direct current

 ...................... Class I Construction 

(grounded)

…/min ..............per minute
BPM ....................beats per minute
IPM .....................impacts per minute
RPM .................... revolutions  per 

minute

sfpm ................... surface feet per 

minute

SPM ....................strokes per minute
A .........................amperes
W ........................watts
Wh ......................watt hours

 or AC ...........alternating current

 or AC/DC .... alternating or direct 

current

 ...................... Class II Construction 

(double insulated)

no .......................no load speed
n .........................rated speed

 ......................earthing terminal

 .....................safety alert symbol
 .....................visible radiation
 ..................... wear  respiratory 

protection

 ..................... wear eye protection
 ..................... wear  hearing 

protection

 ..................... read  all 

documentation

• 

Air vents often cover moving parts and should be 

avoided.

 Loose clothes, jewelry or long hair can be caught 

in moving parts.

Additional Safety Information

 

WARNING: 

Never modify the power tool or any part of 

it. Damage or personal injury could result.

 

WARNING: ALWAYS 

use safety glasses. Everyday 

eyeglasses are NOT safety glasses. Also use face or dust 
mask if operation is dusty. ALWAYS WEAR CERTIFIED 
SAFETY EQUIPMENT:
•  ANSI Z87.1 eye protection (CAN/CSA Z94.3),
•  ANSI S12.6 (S3.19) hearing protection,
•  NIOSH/OSHA/MSHA respiratory protection.

 

WARNING:

 Some dust contains chemicals known 

to State of California to cause cancer, birth defects 
or other reproductive harm. Some examples of these 
chemicals are: 
•  compounds in fertilizers,
•  compounds in insecticides, herbicides 

and pesticides,

•  arsenic and chromium from chemically 

treated lumber. 

To reduce your exposure to these chemicals, wear 
approved safety equipment such as dust masks that 
are specially designed to filter out microscopic particles. 

 

WARNING: 

Use of this tool can generate and/or 

disperse dust, which may cause serious and permanent 
respiratory or other injury. Always use NIOSH/OSHA 
approved respiratory protection appropriate for 
the dust exposure. Direct particles away from face 
and body.

 

WARNING:

 

Always wear proper personal hearing 

protection that conforms to ANSI S12.6 (S3.19) 

during use. 

Under some conditions and duration 

of use, noise from this product may contribute to 
hearing loss.

 

CAUTION:

 

When not in use, place tool on its 

side on a stable surface where it will not cause a 

tripping or falling hazard. 

Some tools with a large 

battery pack will stand upright but may be easily 
knocked over.

•  When the appliance is stored or transported in a vehicle 

it should be placed in the trunk or restrained to prevent 
movement following sudden changes in speed or direction.

•  When not in use, the appliance should be stored in a dry, 

well ventilated place out of reach of children.

•  Children should not have access to stored appliances.

Safety of Others

•  This appliance is not intended for use by persons (including 

children) with reduced physical, sensory or mental 
capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning 
use of the appliance by a person responsible for their safety.

•  Children must be supervised to ensure that they do not play 

with the appliance.

•  Keep all bystanders away. Make sure that other persons 

and pets are at least 100 ft (30 m) away.

Summary of Contents for DWOAS9ST

































Reviews: