English
10
Three Year Limited Warranty
D
e
WALT
will repair or replace, without charge, any defects
due to faulty materials or workmanship for three years
from the date of purchase (two years for batteries). This
warranty does not cover part failure due to normal wear
or tool abuse. For further detail of warranty coverage and
warranty repair information, visit
www.dewalt.com
or call
1-800-4-
D
e
WALT
(
1‑800‑433‑9258
). This warranty does
not apply to accessories or damage caused where repairs
have been made or attempted by others. THIS LIMITED
WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING
THE IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, AND EXCLUDES ALL
INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential
damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty
D
e
WALT
tools are covered by our:
2 YEARs FREE sERViCE
D
e
WALT
will maintain the tool and replace worn parts caused
by normal use, for free, any time during the first two years
after purchase.
2 YEARs FREE sERViCE On D
e
WAlT BATTERY PACKs
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360,
DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT,
DCB207, DCB361
3 YEARs FREE sERViCE On D
e
WAlT BATTERY PACKs
DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT,
DCB206, DCB208, DCB230, DCB240, DCB606, DCB609,
DCB612, DCB615
nOTE:
Battery warranty voided if the battery pack is
tampered with in any way.
D
e
WALT
is not responsible for any
injury caused by tampering and may prosecute warranty
fraud to the fullest extent permitted by law.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your
D
e
WALT
Power Tool or Nailer for any reason, you can
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATin AMERiCA:
This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT:
If your warning
labels become illegible or are missing, call 1-800-4-
D
e
WALT
(
1‑800‑433‑9258
) for a free replacement.
Register Online
Thank you for your purchase. Register your product now for:
•
WARRAnTY sERViCE:
Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
•
COnFiRMATiOn OF OWnERshiP:
In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
•
FOR YOUR sAFETY:
Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
• Register online at
www.dewalt.com
Repairs
The charger and battery pack are not serviceable. There are
no serviceable parts inside the charger or battery pack.
WARNING:
To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a
D
e
WALT
factory service center or a
D
e
WALT
authorized service center. Always use identical
replacement parts.
Replacing Guard With Extended Coverage
Guard (Fig. A, L)
An extended coverage guard is available (sold separately)
for extra coverage if desired. Use
D
e
WALT
replacement guard
Part Number N905733.
WARNING:
Never operate appliance without guard
firmly in place.
1. Remove the spool housing as described in the
Replacing
Spool Assembly
section.
2. Remove the two guard screws
13
shown in Fig. L.
3. Lift the guard off at an angle as shown in Fig. L.
4. To attached a new guard, slide the tab
25
of the new
guard under the lip
26
of the motor housing
27
, then
lower the back of the guard into place as shown in Fig. A.
5. Replace and securely tighten the two guard screws
13
.
6. Replace the spool housing as described in the
Replacing
Spool Assembly
section.
