background image

English

4

c ) 

Keep children and bystanders away while 

operating a power tool.

 Distractions can cause you 

to lose control.

2) Electrical Safety

a ) 

Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any 

adapter plugs with earthed (grounded) power 

tools. 

Unmodified plugs and matching outlets will 

reduce risk of electric shock.

b ) 

Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c ) 

Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will increase 

the risk of electric shock.

d ) 

Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or 

moving parts. 

Damaged or entangled cords increase 

the risk of electric shock.

e ) 

When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

f ) 

If operating a power tool in a damp location 

is unavoidable, use a ground fault circuit 

interrupter (GFCI) protected supply. 

Use of a GFCI 

reduces the risk of electric shock.

3) Personal Safety

a ) 

Stay alert, watch what you are doing and use 

common sense when operating a power tool. Do 

not use a power tool while you are tired or under 

the influence of drugs, alcohol or medication.

 

moment of inattention while operating power tools 

may result in serious personal injury.

b ) 

Use personal protective equipment. Always wear 

eye protection. 

Protective equipment such as a dust 

mask, non‑skid safety shoes, hard hat, or hearing 

protection used for appropriate conditions will reduce 

personal injuries.

c ) 

Prevent unintentional starting. Ensure the switch 

is in the off‑position before connecting to power 

source and/or battery pack, picking up or carrying 

the tool. 

Carrying power tools with your finger on the 

switch or energizing power tools that have the switch 

on invites accidents.

d ) 

Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may result 

in personal injury.

e ) 

Do not overreach. Keep proper footing and 

balance at all times. 

This enables better control of the 

power tool in unexpected situations.

f ) 

Dress properly. Do not wear loose clothing or 

jewelry. Keep your hair, clothing and gloves away 

from moving parts. 

Loose clothes, jewelry or long hair 

can be caught in moving parts.

GENERAL POWER TOOL SAFETY WARNINGS

 

WARNING:

 

Read all safety warnings, instructions, 

illustrations and specifications provided with 

this power tool. 

Failure to follow all instructions 

listed below may result in electric shock, fire and/or 
serious injury.

SAVE ALL WARNINGS 

AND INSTRUCTIONS FOR 

FUTURE REFERENCE.

The term “power tool” in the warnings refers to your 
mains‑operated (corded) power tool or battery‑operated 
(cordless) power tool.

1) Work Area Safety

a ) 

Keep work area clean and well lit.

 Cluttered or dark 

areas invite accidents.

b ) 

Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust.

 Power tools create 

sparks which may ignite the dust or fumes.

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert 
symbols and words to alert you to hazardous situations and 
your risk of personal injury or property damage.

 

DANGER:

 Indicates an imminently hazardous 

situation which, if not avoided, 

will 

result in 

death or 

serious injury

.

 

WARNING:

 Indicates a potentially hazardous situation 

which, if not avoided, 

could

 result in 

death or 

serious injury

.

 

CAUTION:

 Indicates a potentially hazardous situation 

which, if not avoided, 

may

 result in 

minor or 

moderate injury

.

 

(Used without word) Indicates a safety related message.

NOTICE:

 Indicates a practice 

not related to 

personal injury

 which, if not avoided, 

may

 result in 

property damage

.

Intended Use

This string trimmer attachment is to be used only with 
DEWALT powerheads. Your string trimmer has been designed 
for professional and residential trimming applications. DO 
NOT use this tool for any job other than its intended use.
This is not an edger and is not intended for edging.

DO nOT 

use under wet conditions or in the presence of 

flammable liquids or gases.

DO nOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use 
this tool.

English (original instructions)

 

WARNING:

 

Read all safety warnings and all 

instructions. 

Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury.

WARNING:

 To reduce the risk of injury, read the 

instruction manual.

Summary of Contents for DWOAS9ST

































Reviews: