Develop ineo+ 220 Quick Manual Download Page 65

Page: 65 / 302

ineo+ 220/280/360 (Version 3)

1-57

1.16

Replacing consumables

Replacing a drum unit

The following procedure describes how to replace a drum unit.

NOTICE

Keep used drum units in their black plastic bags inside their boxes to be collected by your service
representative.

The drum unit may be easily damaged by light. Leave the drum unit in the black plastic bag until immediately
before it is to be installed.

If a drum unit other than black is empty, printing can continue using black. Press [Continue], and then select
the job to be printed.

CAUTION

Precautions for toner spills

Be careful not to spill toner inside the machine or get toner on your clothes or hands.

If your hands become soiled with toner, immediately wash them with soap and water.

If toner gets in your eyes, immediately flush them with water, and then seek professional medical
attention.

Summary of Contents for ineo+ 220















































































































































































































































































































Search results

Summary of Contents for ineo+ 220

Reviews:

Related manuals for ineo+ 220

Brands by name

Popular brands

Develop ineo+ 220, Quick Manual

Search results

Summary of Contents for ineo+ 220

Reviews:

Related manuals for ineo+ 220

Brands by name

Popular brands