Develop ineo+ 220 Quick Manual Download Page 64

Page: 64 / 302

Replacing consumables

1-56

ineo+ 220/280/360 (Version 3)

1.16

Replacing the waste toner box

The following procedure describes how to replace the waste toner box.

NOTICE

Keep used waste toner box, on which the cap was installed, in the plastic bag inside the box to be collected
by your service representative.

CAUTION

Handling toner and the toner box

Do not burn toner or the toner cartridge.

Toner expelled from the fire may cause burns.

CAUTION

Precautions for toner spills

Be careful not to spill toner inside the machine or get toner on your clothes or hands.

If your hands become soiled with toner, immediately wash them with soap and water.

If toner gets in your eyes, immediately flush them with water, and then seek professional medical
attention.

New waste toner box

Summary of Contents for ineo+ 220















































































































































































































































































































Search results

Summary of Contents for ineo+ 220

Reviews:

Related manuals for ineo+ 220

Brands by name

Popular brands

Develop ineo+ 220, Quick Manual

Search results

Summary of Contents for ineo+ 220

Reviews:

Related manuals for ineo+ 220

Brands by name

Popular brands