Pictures for illustrati ng pur poses o nly
5
IMPORTANT
This section should be read caref ully to ensure saf e and correct installation of your humidif ier.
GENERAL
This manual contains all details necessary f or the planning and installation of the ElectroVap RTH humidif ier. In addition
commissioning and maintenance details are included.
The manual is intended for use by engineers and properly trained technical personnel. Maintenance, servicing or repair
work must only be carried out by suitable skilled and qualif ied personnel, the customer must be responsible for ensuring
their suitability.
Any risks or hazards, especially when working from ladders or towers should be identified by a skilled and
Health and Safety representative and effective control measure put in place.
No liability will attach to the Distributor if any damage, injury or accident is attributable to inattentiv e, inappropriate, negligent
or incorrect operation of the machinery whether or not caused deliberately. Always isolate all electrical and water supplies
bef ore commencing any maintenance.
Ev ery effort has been made to ensure details contained in this manual are correct, howev er, in view of the wide range of
conditions experienced in air handling systems, the information prov ided should only be used as a guide. Please contact
your Agent if any doubt.
Correct use
ElectroVap RTH humidifiers are ONLY intended for use with air handling systems or direct air humidification.
ANY OTHER APPLICATION IS NOT CONSIDERED USE FOR THE INTENDED PURPOSE. THE MANU-
FACTURER CANNOT BE MADE LIABLE FOR ANY DAMAGE RESULTING FROM INCORRECT USE.
Water
ElectroVap RTH humidifiers are designed to be used with mains, demineralized R/O with a minimum conduc-
tivity of 30 µs or softened water. On no account attempt to introduce any other fluid or chemical into the sys-
tem. Water supply should not exceed 6.0 bar and installation should comply with local regulations.
If the w a-
ter pressure exceeds 6.0 bar, a w ater regulator valve must be used.
Electricity
All work concerned with electrical installation MUST only be performed by skilled and qualified technical personnel (eg elec-
trician or technicians with appropriate training). The customer MUST be responsible for ensuring their suitability.
It is the duty of the installer to ensure that suitable sized cables and MCB protection is prov ided. Please observe the local
regulations concerning the provision of electrical installations.
Warranty
A two year warranty term - cost and labor - is applicable to the parts of the ElectroVap RTH to the exception
of the consumable parts provided our recommendations of use & maintenance have been adhered to. Failure
to specify and fit original parts and accessories will invalidate our warranty.
N
OTE
The manufacturer’s policy is one of continuous research and development. He therefore reserves the right to
amend without notice the specifications given in this document.
The photographs are for illustrating purposes only.
E
LECTRO
V
AP
RTH-V2
Safety information