Detnov CCD-020, Installation Manual

Page: 18 / 40

18
EN
3.2.3. Location of the control panel on the wall
Choose a place that is easy to access and free of obstacles, where the indicator
lights can be seen without difficulty and the cover can be removed easily. The
control panel must be placed at a height of 1.5 m from the floor.
3.2.4. Fixing the control panel to the wall
To fix the control panel to the wall, use the rear housing as a template. To do
this, hold it against the wall in the desired place and mark the position of the
fixing holes, making sure that the housing is level.
CAUTION:
Do not use the rear housing as a guide when you are
going to drill the holes, it may cause irreparable damage to the unit.
Drill the holes into the wall and insert the wall plugs. Use the wall plugs recommended in
SECTION 1.7.1. and screw in the housing through the holes in the case, using the screws
recommended in that point.
235 mm
225 mm
188 mm
8 mm