3300-0298-0M Rev E
y
Solace Dialysis Scale Owner’s
46
Changing the Network Credentials
1. With the scale turned on and the Weight screen displayed, press the
Menu
key.
2. The display will change to show the Settings Overview 1 screen.
3. Press
Setup
on the touchscreen.
4. The display will change to show the ENTER PASSCODE screen.
5. Using the 10-key on the touchscreen, enter 64870 and then press the
Save
key.
6. The display will change to show the Settings Page 1 screen.
7. Press the
>>>
key to advance to the Settings Page 7 screen.
8. Touch the
SSID:
key.
9. You will be prompted to clear the network credentials.
CLEAR SSID
0
1= Clear
wireless
profile
1
2
3
4
5
6
7
8
9
SAVE CANCEL
0
.
DEL
10. Press 1 on the entry screen, and then press the
Save
key to clear the credentials.
11. Press the
Exit
key to exit Setup, and return to the Weight screen.
12. Repeat the steps in the Configure Wi-Fi Network Module on the previous page to set the
new network credentials.
Display Wi-Fi Network Settings
1. With the scale turned on and the Weight screen displayed, press the
Menu
key.
2. The display will change to show the Settings Overview 1 screen.
3. Press the
>>>
key to advance to the Settings Overview 2 screen.
4. The scale’s Wi-Fi network settings will be shown.
5. Press the
Exit
key to exit Settings Overview 2 and return to the Weight screen.
You should see the status of the Wi-Fi on the Settings Overview 2 screen. If a scan of Wi-Fi
networks shows the “REDBIRD_WIFI_XX:XX” AP, then the module is in listening mode. Refer
to the
Configure Wi-Fi Network Module
section for the procedure to set the Wi-Fi credentials.
