3300-0298-0M Rev E
y
Solace Dialysis Scale Owner’s
41
WI-FI AND BLUETOOTH 5.0
The Detecto Solace In-Floor Dialysis Scale has a Wi-Fi and Bluetooth 5.0 wireless transmitter
inside the weight display that has been designed for an environment where interfacing the
scale to a Wi-Fi network or pairing to a Bluetooth-capable device is desired.
The following sections will guide you through the setup and operation of the Wi-Fi and
Bluetooth 5.0 features of the scale.
Wi-Fi Features
x
Soft Access Point (AP) for setting credentials for Wi-Fi module
x
Setup option to select a static or dynamic IP address
x
Built-in webserver to display weight, height, and BMI
x
TCP/IP connection for continuous output of weight, height, and BMI
WI-FI SETUP
Enable and Configure Wi-Fi Networking
NOTE:
Default Network Settings are: Wi-Fi = Off, Bluetooth = Off, and DHCP = On.
1. With the scale turned on and the Weight screen displayed, press the
Menu
key.
2. The display will change to show the Settings Overview 1 screen.
SETTINGS OVERVIEW 1
>>>
Revision 1.00.09, Display Rev. 1.0.18
Audit Trail -- Cal=4, Cfg=2
Range 1: 600.0 x 0.2 -- 2: 1000.0 x 0.5
Weight Units=lb Height Units=in
Auto Lock=5 s Sonar Ht=221.5 cm
Motion=3 div. Filter=Off
OIML=No ZeroTrack=10/2 d
USB: SMA Gravity=0.000000
Power up zero=No
Sonar Exit Setup
3. Press
Setup
on the touchscreen.
4. The display will change to show the ENTER PASSCODE screen.
ENTER PASSCODE
Enter passcode to
access settings.
Press CANCEL to
exit.
1
2
3
4
5
6
7
8
9
SAVE CANCEL
0
.
DEL
5. Using the 10-key on the touchscreen enter 64870, and then press the
Save
key.
