8555-M512-O1 Rev E
y
MedVue MV1 Owner’s
20
OPERATION, CONT.
Body Mass Index (BMI) Operation
Using Mechanical Height Rod or Entering Known Height
1. Press the
ON/OFF
key to turn the MV1 on.
2. If required, press the
ZERO
key to zero weight display.
3. Perform tare operation if required. Refer to Push Button Tare or Tare Weight Entry in
previous section for instructions on using tare.
4. Press the
ID/HEIGHT
key.
5. If Centimeters was selected for
HEIGHT UNITS
in setup, the display will change to show
CENTIMETERS
.
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and
then press the
ENTER
key.
6. If Millimeters was selected for
HEIGHT UNITS
in setup, display will change to show
MILLIMETERS
.
a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then
press the
ENTER
key.
7. Assist patient onto scale.
8. When weight is stable (STABLE
[
[\
annunciator will turn on), read weight, height, and
BMI displays.
9. If a printer is connected to scale, press the
key to print a ticket. Note that BMI and
height display will clear when ticket prints.
10. Assist patient off scale.
11. If a printer is not connected to scale, the BMI display will clear when the patient is
assisted off scale, and the weight returns to zero.
Body Mass Index (BMI) Operation with ID
Using Mechanical Height Rod or Entering Known Height
1. Press the
ON/OFF
key to turn MV1 on.
2. If required, press the
ZERO
key to zero weight display.
3. Press the
ID/HEIGHT
key.
4. Display will change to show
)3
.
5. Using numeric keys, enter up to a 14-digit alphanumeric identification number.
6. Press the
ENTER
key.
7. If Centimeters was selected for
HEIGHT UNITS
in setup, the display will change to show
CENTIMETERS
.
a. Use numeric keys to enter up to 4 digits (# # # . #) for height in centimeters and
then press the
ENTER
key.
8. If Millimeters was selected for
HEIGHT UNITS
in setup, display will change to show
MILLIMETERS
.
a. Use numeric keys to enter up to 4 digits (# # # #) for height in millimeters and then
press the
ENTER
key.
9. Assist patient onto scale.
10. When weight is stable (STABLE
[\
annunciator will turn on), read weight, height, and
BMI displays.
11. If a printer is connected to scale, press the
key to print a ticket. Note that BMI, ID
and height display will clear when ticket prints.
12. Assist patient off scale.
13. If a printer is not connected to scale, the BMI display will clear when the patient is
assisted off scale, and the weight returns to zero.
Summary of Contents for MedVue MV1
Page 1: ...8555 M512 O1 Rev E y MedVue MV1 Owner s 1 Model MV1 Medical Weight Analyzer Owner s Manual ...
Page 2: ...8555 M512 O1 Rev E y MedVue MV1 Owner s 2 ...
Page 6: ......
Page 57: ...8555 M512 O1 Rev E y MedVue MV1 Owner s 51 PARTS IDENTIFICATION CONT ...
