47
46
Note the meaning of below terms used in the manual:
THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS
Note the meaning of below terms used in the manual:
THERAPY = HEALTH IMPROVEMENT and DIAGNOSTICS = PROGNOSIS OF HEALTH STATUS
Making homeopathic homaccords using the ES
Homaccord homeopathics are homeopathic remedies that have different potencies of the same
homeopathic all mixed together. One example of this is the famous company Heel’s Berberis-
Homaccord for draining the kidneys. Here is the exact formula that they use:
Berberis-Homaccord oral drops: 100 ml contain: ingredients: Berberis vulgaris D2, D10, D30,
D200 0.4 g each; Colocynthis D2, D10, D30, D200; Veratrum album D3, D10, D30, D200 0.3 g each.
Other ingredients: ethanol, purified water.
You can see that for the Berberis vulgaris there are 4 different potencies of this homeopathic all
mixed together, namely: D2, D10, D30 and D200.
Using the Professional, it is also possible for the practitioner to also make homaccords of
various homeopathic substances.
How do we do this?
1. Connect INPUT BRT to the SEL connector.
2. Connect OUTPUT BRT to the aluminium POT – take the wire from the PASSIVE connector
and the measure probe and touch the POT in order to ground and neutralize the POT.
3. We can also attach the brass HAND ELECTRODE to the POT so that the visitor will receive the
IMPRINTING HOMEOPATICS FOR 5-7 MINUTES
1. Short wire from INPUT BRT to the SEL connector
2. Connect the POT to the OUTPUT BRT connector
3. POWER ON
4. Imprint for 5-7 min
INVERSION = OFF
INTERRUPT = OFF
CONTROL = OFF
FILTERS = OFF
VOLUME = 60
Diagram 23: Autonosodes and ES
1
3
2
POWER ON
homeopathic remedies digitally while in circuit – the effects of this will last 3 days in the visitor as
this will get stored in the «PLASMA MEMORY».
4. Choose the remedies from the ELECTRONIC SELECTOR that you want on the various levels
– each remedy that you choose will have separate codes for different potencies e.g. Arnica D3,
D6, D12 etc. will all have different codes. We can choose one homeopathic at each level, then on
another level place a second potency of the same homeopathic and so on. This will produce the
mixture of different potencies or homaccord that we want. Alternatively, we can choose different
remedies to form a complex and place these at different levels – we can choose a maximum of 18
remedies for each complex.
5. Place the VOLUME at 60 so that the visitor will require lower dosages if you place the VOLUME
on 30 then the amplitude will be less, so the number of pills required would be greater.
6. Press the OUT button on the SELECTOR
7. Make certain that INVERSION is switched off, and the INTERRUPT is OFF
8. Then press POWER to begin the copy
9. Leave for 5 - 7 minutes, even though the homeopathic will receive most of the information
within the first few seconds. We leave it for a few minutes in order to “seal” the information into
the sugar pills.
9. STORAGE
The device without packing must be kept indoors at temperatures between 10 to 35 °C and a
relative humidity of not more than 80%.
To protect the device from damage, it is recommended that the adapter is disconnected from
the device when not in use.
It is recommended that packing materials are retained during the warranty period.
10. TRASPORTATION
Since the device has a high-precision indicator instrument which is sensitive to external
physical impact, during transportation, it is recommended:
•
to protect the device from the shocks and knocks
•
not to drop the device
•
not to drop other objects on the device.
The device must be protected from moisture and active chemicals agents.
MAKING HOMEOPATHICS FROM ES
Summary of Contents for DeVita Professional
Page 27: ......
