ENG
19
Hold the ceiling bracket against the ceiling and
strike the ceiling anchor with a hammer
Tighten fastening in line with manufacturer's data
Tighten M8 safety screw and nut
1
(20 Nm /
14.75 lbf ft)
Tighten all 4 threaded pins
2
(5 Nm / 3.68 lbf ft)
DANGER
Mortal danger from electric shock
Disconnect from the power supply and secure
against unintended switching on before starting
work on the power connection.
Make power connection
Connect the secondary cable to the connection
point
Pay attention to the polarity:
+ = black
→ Connect the brown cable
– = white
→ Connect the blue cable
Push cover and end ring over the ceiling bracket
and tighten them (0.5Nm)
3.3
Assemble the light on ceiling tube
WARNING
The light will fall if fastening is done incorrectly
The securing element must be screwed in fully and
correctly.
Insert the light and the adapter 1 into the ceiling
tube 2
Insert securing element with threated pin
3
and
screw in to the stop
Loosen by one quarter-turn to ensure the operation
of the turnover axis
4
ASSEMBLY of OPTICLUX 10-1 P TX /
OPTICLUX 10-2 P TX
4.1
Load data
Bending moment M
B
25Nm
Vertical weight F
G
20N
4.2
Assembly
The lights are equipped with an adapter pin.
The light must be positioned in one of the
accessories described in chapter 9.
5
OPERATION
5.1
OPTICLUX 10-1 C T1 / OPTICLUX 10-2 C T1
DANGER
Electric shocks are life-threatening
Only connect to a mains power supply with a
protective conductor
5.2
OPTICLUX 10-1 C T1 /
OPTICLUX 10-2 C T1 /
OPTICLUX 10-1 P TX /
OPTICLUX 10-2 P TX
DANGER
Electric shocks are life-threatening
Do not insert any power cable that is damaged.
If there is any sign of damage to the power cable,
replace it immediately with a new one.
The connection voltage and frequency must match
the data on the type plate.
Summary of Contents for D15953100
Page 49: ......