Derbi ATV DXR 200, Workshop Manual

Page: 119 / 194

118
< continue 5-2-4. Installation>
- Reverse the “5-1-1” procedure and follows the lubricate as;
18. tighten rear axle inner nut (1)
* torque: 1st. tighten 5.0 kg-m; final tighten 24 kg-m tighten rear axle outer nut (2)
* torque: 19 kg-m
NOTE
REAR AXLES NUT TIGHTEN STEPS -- RARER 5-2-5
19. install rear wheel
20. install rear wheel nuts under temporary tighten
21. remove the stand and set the ATV on ground securely
22. tighten rear wheel nut
* torque: 4.5 kg-m
23. replace the parking brake
24. adjust drive chain slack -- refer to part 3-25
* drive chain slack: 30-40mmd.l8-1.57 in)
25. tighten rear axle hub upper nut
* torque: 5.0 kg-m
26. tighten rear axle hub lower nut
* torque: 5.0 kg-m
5-2-5. Rear axles nut tighten steps:
01. apply the bone (or locking agent) on rear axle nuts threads.
02. (1st.) tighten the inner rear axles nut on 5.0 kg-m
03. (2nd.) tighten the outer rear axles nut while holding the inner rear axle nut on 19 kg-m.
04. (3rd.) loosen the inner rear axles nut while holding the outer rear axle nut on 24 kg-m.