Denwa Communications DW-710 User Manual Download Page 14

Page: 14 / 76

www.denwaip.com

Key

Meaning

Click this icon, and it will switch to pre-dial interface. You can make some phone calls through

the screen or keyboard.

Functional applications:

Phone

Settings

Contacts

Android

Settings

Message

MWI

Has the function of sending and receiving e-mail. When an account has been configured suc

cessfully, you can send and receive your e-mail on the phone and this account will automatically

It contains System, Network, Account, Call, Display and so on. You can configure

some settings.

Support functions such as search, add, remove and edit.

It contains the Call settings, Basic settings,Advanced settings, VOIP and so on, you can

configure some settings in the corresponding menu.(Android system settings).

Like the phone, with messages to write, read and send function.

All calls will be transferred into voice mail when the MWI is enabled.

Summary of Contents for DW-710













































































Search results

Summary of Contents for DW-710

Reviews:

Related manuals for DW-710

Brands by name

Popular brands

Denwa Communications DW-710, User Manual

Search results

Summary of Contents for DW-710

Reviews:

Related manuals for DW-710

Brands by name

Popular brands