manualshive.com logo in svg

Denwa Communications DW-710, User Manual, Page: 34 / 76

Share
Download
Denwa Communications DW-710 User Manual Download Page 34

www.denwaip.com

34

Account

Display name:

 Configure the display name, it allows the English alphabet input (does not

support Chinese). 

Domain realm

: Configure the SIP domain name (You do not need to configure it because 

the system will configure automatically).

Proxy Server Address

: Configure the proxy server address.

Proxy Server Port

: Configure the proxy server address.

Backup Proxy Server Address

: Configure a backup server address. When the primary

server is not connected, you can use the backup server for calling communications (The 

backup server can be connected only when the primary server cannot connect); When 

the primary server is connected, the phone will automatically switch back to the primary 

server to communicate.

Backup server port

: Configure the backup server port.

Backup Proxy Server port

: Configure the SIP register proxy server port.

Server name

: Configure the SIP register server name.

Registration expire(s)

: Configure the server registration expire(s), default is 60 seconds. If 

the registration time of the server required is greater or less than the time of the phone to 

configure, telephone can automatically modify to the time limit that server recommended,

and register again.

DTMF Type

: Set DTMF mode, there are four types:

In-band

RFC2833

SIP_INFO

Summary of Contents for DW-710













































































Reviews:

No comments