Denwa Communications DW-710 User Manual Download Page 70

Page: 70 / 76

www.denwaip.com

Notes: Any changes made on this page require a reboot to become active.

It is suggested that changes to HTTP Port and Telnet ports be values greater than 1024. Values less than 1024

are reserved.

If the HTTP port is set to 0, HTTP service will be disabled.

Web Server Type

eaning

HTTP Port

RTP Port Quantity

RTP Port Range Start

HTTPS Port

Port f or w eb b rowser access. Default value i s 80. To enhance

security, change this from the default. Setting this port to 0 will

disable HTTP access.

Example: The IP address is 192.168.1.70 and the port value is

8090, the accessing address is http://192.168.1.70:8090.
Port for HTTPS access. Before using https, an https

au-

thentication certification must be downloaded into the phone.

Default value is 443. To enhance security, change this from the

default.
Set the beginning value f or R TP P orts. P orts a re d ynamically

allocated.
Set the maximum quantity of RTP Ports. The default is 200.

Field Name

Specify Web Server Type – HTTP or HTTPS

Summary of Contents for DW-710













































































Search results

Summary of Contents for DW-710

Reviews:

Related manuals for DW-710

Brands by name

Popular brands

Denwa Communications DW-710, User Manual

Search results

Summary of Contents for DW-710

Reviews:

Related manuals for DW-710

Brands by name

Popular brands