manualshive.com logo in svg

Denwa Communications DW-710, User Manual, Page: 19 / 76

Share
Download
Denwa Communications DW-710 User Manual Download Page 19

www.denwaip.com

19

 

The button map the sip line, it enter the dial pad and light the default sip line when 

you click the button.

Line

Led Status

Led Status

The button map some Key Event.

Title: Consistent with the subscription name

Subtype: Some basic keys

It maps the keypad of the phone, allowing you to edit the dialed number or input numbers

 during a call.

Key Event

DTMF

It maps the website; click it to open the URL directly.

URL

Multicast

It maps the Multicast; you can click it to make a multicast.

 

c

The object is idle.

Steady green

Led Status

Description

The object is ringing.

The object is active.

Slow blinking red

Steady red

The LED status of BLF

Steady orange

Off

The object has failed.

The subscribed number is in a call with current line.

Fast blinking red

Not subscribed.

 

The object is online.

Steady green

Led Status

Description

The object is ringing.

The object is active.

Slow blinking red

Steady red

The LED status of Presence

The object has failed.

Not subscribed.

Fast blinking red

Off

Summary of Contents for DW-710













































































Reviews:

No comments