Denver BTS-400, Owner'S Manual

Page: 91 / 96

3
1 Power Indicator 8
2 Remote sensor
3 USB port (5V output, for charging only)
4 MODE button
Press to toggle between Bluetooth and
Aux-in modes
5 Play/Pause button
>( / Vol + ) Button:
·Press this button once to to
advance to the next track .
Press and hold this button to
adjust volume level up.
6 Power On/Standby Button 9 Aux-In Jack
7 10 AC POWER CORD
11 Button
12 button
13 Vol- Button
< ( / Vol -) Button
·Press this button once to return to the
beginning of current track or previous
track.
Press and hold this button to adjust
volume level down.
14 Vol+ Button
POWER SOURCES
Power of Main unit
This unit is designed or operated on AC 230V~50Hz household mains supply,
connect the AC cord into a convenient AC wall outlet.
Power of Remote Control
To use the remote control, please ensure the remote control battery CR2032
(included) is installed properly and take the insulation clarity paper out.(Once you
stop to use the remote control, please Insert in it same as before). Replace the
remote control battery when it stops working. It is highly recommended to use a good
quality button cell.
BATTERY NOTE AND CARE
Š Danger of explosion if the battery is replaced incorrectly. Replace only with the
same type battery.
Š Only use a good quality known brand battery to ensure the longest life and best
performance.