ENGLISH
•
7
Section 6: Cavitron™ PROPHY-JET® cont'd
1. AC Power Cord Set
2. Cavitron® JET Air Polishing Insert #63740
Lubricate the rubber O-ring on the insert with water before placing it into the handpiece. Place the insert rod into the insert port of the
handpiece. Align the powder delivery tube with the powder delivery port and gently push into handpiece until fully seated.
6.4 Foot Control Information & Operation
The Foot Control is a two-position momentary switch, which acti-
vates both lavage and powder flow and air polishing at the
insert tip.
6.5 Operation for Air Polishing Procedures
Air Polishing Insert
Nozzle:
Tube-in-a-tube
design delivers precise air/
water/powder
mixture at point
of delivery.
Prophy Powder Delivery Tube:
Directsair/powder flow to insert tip.
O-Ring:
Seals water when Insert Nozzle is fully seated in
Handpiece. O-ring should be replaced when worn.
Insert Rod
Foot control
released.
Bleed air exits
insert nozzle tip.
Foot control
depressed
half way.
Foot control
depressed
all the way.
Lavage flow
(rinsing function)
is activated.
Air Polishing
Function is
activated.
Summary of Contents for Cavitron Prophy-Jet
Page 16: ......
Page 18: ...Table des mati res...
