3 Technical description
3.2 Certification
Dentsply Sirona
Operating Instructions inLab Profire
12
67 15 887 D3770
D3770.201.01.02.02 05.2019
3.2
Certification
CE mark
This product bears the CE mark in accordance with the provisions of
Council Directive 2006/42/EC (machinery directive).
CAUTION
CE mark for connected products
Further products which are connected to this unit must also bear the
CE mark. These products must be tested according to the applicable
standards.
We declare conformity for the inLab Profire ceramic sintering furnace on
the basis of the following standards:
● Safety: EN 61010-1:2010 and EN 61010-2-010:2014
● EMC: EN 61326-1:2013
● Risk assessment and risk reduction EN ISO 12100:2010
3.3
Intended use
The inLab Profire high-temperature furnace is intended for commercial
use in dental laboratories and may only be used for the sintering of
sinterable ceramics and cobalt-chromium.
This unit must not be used for any other purpose. Any use beyond this
scope – e.g. reasonably foreseeable misuse – is considered to be
improper use. The manufacturer assumes no responsibility for any
damage resulting from this. The user alone bears the risk in this regard.
Intended use also includes compliance with these Operating
Instructions and the relevant maintenance instructions.
3.4
Foreseeable misuse
Reasonably foreseeable misuse includes:
● The deployment of untrained and inadequately qualified personnel.
● Using products that are not approved by the manufacturer.
● Using spare parts that are not approved by the manufacturer.
● Use that is not in accordance with the declaration of conformity.
● Technical changes and modifications to the unit that have not been
approved by the manufacturer.
