Dentsply Sirona
Operating Instructions inLab Profire
5 Operation
5.9 Preparations for sintering ZrO2
67 15 887 D3770
D3770.201.01.02.02 05.2019
35
1
2
● You can load and unload the tray with the sinter fork (1). For this
purpose, there are recesses in the door insulation.
The tray (2) with the split support disc should be positioned at the
end of the fork.
Positioning a second sintering tray in the inLab Profire - only for
classic mode
● Position an unsplit support disc on the first sintering tray. You can
then place the second sintering tray on it.
IMPORTANT
Stacking two sintering trays is not permitted for speed-sinter
processes!
Only use in “Classic” sinter mode!
