2 Safety instructions
Dentsply Sirona
Operating Instructions inLab Profire
8
67 15 887 D3770
D3770.201.01.02.02 05.2019
CAUTION
Damage resulting from unauthorized alterations
The inLab Profire high-temperature furnace may only be altered with
our express prior approval. We are not liable for unauthorized
alterations of any kind.
➢ Switch the unit off and disconnect the power plug prior to
performing maintenance tasks.
WARNING
Separate circuit
The inLab Profire high-temperature furnace must always be
connected to a separate circuit with at least a 16A fuse. The fuses
must be of the C type.
WARNING
Fire hazard due to covering ventilation slots on the rear side of the
casing
Covered ventilation slots can overheat the furnace and cause the
covering object to ignite.
➢ Do not cover the ventilation slots on the rear side of the casing
with objects.
➢ Maintain a minimum distance of 100 mm from the rear side of the
casing to other objects.
Note on the prevention, recognition and
elimination of unintended electromagnetic
effects
This device is a piece of electrical equipment with a supply voltage
below 1000 VAC and is intended for commercial use. It is to be installed
in dental laboratories or other areas with a controlled electromagnetic
environment. The applicable EMC requirements comply with EN 61326:
2006.
DANGER
Electrical power!
Risk of fatality posed by electric shock.
➢ Do not touch live cables and components with wet hands.
➢ Please observe the accident prevention regulations for handling
electricity.
➢ Disconnect the power supply of the furnace before installation,
maintenance, cleaning, and repair work, and ensure that the
power will not be inadvertently switched on.
IMPORTANT
In the event of any work on the inLab Profire high-temperature
furnace, personal protective equipment must be worn to prevent
accidents and harm to health.
