Dentsply Sirona
Operating Instructions inLab Profire
5 Operation
5.7 Explanation of the symbols
67 15 887 D3770
D3770.201.01.02.02 05.2019
31
Pre-drying active (45 minutes)
This button is displayed if pre-drying has been acti-
vated. In this instance, the pre-drying time is 45
minutes. Tap once more on the button "Activate
pre-drying" to increase the pre-drying time to 60
minutes.
Pre-drying active (60 minutes)
This button is displayed if pre-drying has been acti-
vated. In this instance, the pre-drying time is 60
minutes. Tap once more on the button "Activate
pre-drying" to deactivate pre-drying.
Auto-start time setting
With this function, you can set when the furnace
should start with the sintering.
Tap on the button to open the settings dialog. Here
you can set the exact time and date. The furnace
will begin with sintering at this set point in time.
Following successful setting of the auto start time,
the symbol is shown with an orange border.
Tap on the “Start program” button to activate the
auto start at the set time.
Following successful activation, the button is shown
with an orange border.
Favorite inactive
This symbol is displayed on the left next to a sinter-
ing program.
If the symbol is white, this sintering program is not a
favorite and the program is also not displayed in the
favorite list.
If you want to add a program to the favorites, then
tap on the symbol. It now becomes a dark-gray
color to indicate that the program has been added
to the favorites.
Favorite active
This symbol is displayed on the left next to a sinter-
ing program.
If the symbol is dark-gray, this sintering program is
a favorite and the program is also displayed in the
favorite list.
If you want to remove a program from the favorite
list, then tap on the symbol. It now becomes a white
color to indicate that the program is no longer a fa-
vorite.
Argon
This symbol is displayed if a program with argon
has been selected. The symbol is labeled with ar-
gon.
