5 Operation
5.7 Explanation of the symbols
Dentsply Sirona
Operating Instructions inLab Profire
32
67 15 887 D3770
D3770.201.01.02.02 05.2019
Interaction symbols
Confirm
Tap on the button if you want to perform the dis-
played operation.
Reject
Tap on the button if you do not want to perform the
displayed operation.
Unit symbols
Rate of increase in °C/min or °F/min
This symbol is displayed to you when configuring a
new program. In the column underneath this sym-
bol, you can set the rate of increase of the tempera-
ture in degrees Celsius per minute.
Temperature in °C or °F
This symbol is displayed to you when configuring a
new program. In the column underneath this sym-
bol, you can set the temperature in degrees Cel-
sius.
Current temperature in °C or °F
This symbol indicates the current temperature of
the furnace in °C.
Time specification end of the sintering operation
This symbol indicates the time when the furnace is
expected to be finished with the process.
Result symbols
Process successful
This symbol is displayed once the process has suc-
cessfully ended.
Process failed
This symbol is displayed if the process has been
ended with an error.
Warning symbols
Warning against heat and hot parts
