5 Operation
5.9 Preparations for sintering ZrO2
Dentsply Sirona
Operating Instructions inLab Profire
34
67 15 887 D3770
D3770.201.01.02.02 05.2019
5.9
Preparations for sintering ZrO2
Recommendation for the filling of the sintering tray
1.
Fill the sintering tray with a whole bottle of sinter beads for ZrO2
(REF 6126457).
2.
Place the parts to be sintered with the chewing surface facing
downward on the sinter beads. In doing so, ensure that the parts to
be sintered and the sintering tray do not come into contact with
each other.
3.
In the case of larger restorations, ensure that all parts of the
restoration through sinter beads are supported by gently pressing
into the bead bed.
Positioning the sintering tray in the inLab Profire
● Position the split support disc centrally on the door insulation. A
recess is present for the tip of the guide pin.
Position the sintering tray on top of it.
