61 30 608 D3497
20
D3497
.
076.01.09
.
02 10.2018
7 Initializing the controller
Dentsply Sirona
Service Manual inFire HTC speed
7
Initializing the controller
In order to guarantee optimal controller performance of the various
laboratory furnaces, different control parameters are preset.
The following code resets the controller to the factory default settings:
✔
The LCD display must be set to
"STNDBY"
.
1. Press the following key for the HT furnace series: F
The cursor appears on the LCD display.
2. Enter the following key sequence: 8 5 4 0
The controller is now reset to the factory default and the
applicable control parameters are activated.
