19
SECTION I: INSTALLING, SETTING UP, AND USING THE
ELITE
pro
XC™
IMPORTANT: DO NOT CONNECT THE ELITE
pro
XC TO YOUR COMPUTER UNTIL YOU HAVE INSTALLED ELOG 15
Install the ELOG Software on the Computer
Complete this step prior to installation and ascertain that communication between the
ELITE
pro
XC
and
PC is established before going into the field.
NOTE
: The new path for Data files in ELOG 15 is: C
:\Users\UserName\Documents\DENT\ELOG\Data
ELOG is compatible with Windows® 7, Windows® 8, Windows® 10 or Vista (32 or 64 bit).
1) Insert the
ELOG CD
into the CD/DVD drive.
The installer starts automatically. If it does not, browse to the CD and locate the ELOGInstaller.exe
program. Start the installer by double-clicking
ELOGInstaller.exe
.
-OR-
Insert the
ELOG USB memory stick
into the USB port.
Browse to the memory stick and locate the ELOGInstaller.exe program. Start the installer by double-
clicking
ELOGInstaller.exe
.
2) Follow the directions on the screen to install the software.
NOTE:
When ELOG is installed, another program, AutoPoll, is also installed. AutoPoll may be used for
unattended and automatic data retrieval from a number of remote loggers where the computer calls the
loggers. See
Appendix D—AUTOPOLL: Unattended Calling from the PC to the Logger.
3) Install the
ELITE
pro
XC
Driver on your computer.
a) Connect the USB cable to a USB port on your computer, inserting the other end in the USB port
on the
ELITE
pro
XC
(Hint: Look for this USB symbol:
).
NOTE
: If a USB cable is used inside an electrical panel it must be rated to the appropriate voltage or
wrapped in an appropriately rated insulating sleeve. The DENT-supplied cable does not meet this
requirement without an insulating sleeve.
b) Perform the setup steps onscreen. You must allow ELOG to install the USB driver for the
ELITE
pro
XC
to work correctly.
c) If the driver installation fails, see Appendix C: Troubleshooting
ELITE
pro
XC
Driver Installation.
www.
.com
1.800.561.8187
Summary of Contents for ELITEpro XC
Page 58: ...58 Typical Single Phase 2 Wire Setup Diagram www com information itm com 1 800 561 8187 ...
Page 59: ...59 Typical Single Phase 3 Wire Setup Diagram www com information itm com 1 800 561 8187 ...
Page 60: ...60 Typical 3 Phase 3 Wire Delta Setup Diagram www com information itm com 1 800 561 8187 ...
Page 61: ...61 Typical 3 Phase 4 Wire Wye Setup Diagram www com information itm com 1 800 561 8187 ...