51
D
ID
Y
OU
K
NOW
?
If a standard setup table is
created using one of the Quick Setup buttons,
then a new command button appears called
View
Typical Setup
. This button displays a schematic
graphic of how to connect the
ELITE
pro
XC
to a
load. The schematic can be printed and carried
into the field for easy reference during
installation.
2) Click
Send SUT and Delete Data
. This loads the new setup table into the meter and clears the data in
the logger. The
Logging is now ON
dialog box briefly displays.
-or-
Click
Download Data then Send SUT
. The
Select A Directory and A Name…
dialog box displays.
Enter the name and location for the data file. After the data is downloaded to the PC and saved,
ELOG automatically sends the new setup table to the meter and starts logging.
-or-
Click
Cancel
.
ELOG automatically initiates logging when a setup table is downloaded to the logger unless the Data
Logging delayed start time is being used.
3) Select
Logger > Display Real-Time Values > Show As Text
to view the real-time values measured by
the logger.
S
AVE A
S
ETUP
T
ABLE ON THE
C
OMPUTER
When you’ve finished selecting the configuration options, the setup table can also be saved for
downloading to the
ELITE
pro
XC
at a later time.
Select
File >
Save
to save the setup file to disk, or
Save As
to save to disk using a different file name
or folder location.
Monitoring can begin once the ELOG software is
configured and the
ELITE
pro
XC
is connected. The
following sections of this chapter provide
assistance in making sure the logger is performing
correctly.
www.
.com
1.800.561.8187
Summary of Contents for ELITEpro XC
Page 58: ...58 Typical Single Phase 2 Wire Setup Diagram www com information itm com 1 800 561 8187 ...
Page 59: ...59 Typical Single Phase 3 Wire Setup Diagram www com information itm com 1 800 561 8187 ...
Page 60: ...60 Typical 3 Phase 3 Wire Delta Setup Diagram www com information itm com 1 800 561 8187 ...
Page 61: ...61 Typical 3 Phase 4 Wire Wye Setup Diagram www com information itm com 1 800 561 8187 ...
