manualshive.com logo in svg

Denso Intelligent Tester II, Operator'S Manual

Share
Download
Denso Intelligent Tester II Operator'S Manual Download Page 22

1  Before Use

- 13 -

When the Intelligent Tester II is not connected to the vehicle, such as with the datalink cable or the external power cable, 
the Intelligent Tester II is powered by its internal battery.
When the Intelligent Tester II is run on its internal battery, a fully charged battery will last approximately 80 minutes if 
there is an oscilloscope cartridge or approximately one hour if there is not.
You can check the amount of power remaining in the battery with the onboard/offboard check screen.

Reference: Page 25 Battery icon (Chapter 2. Basic Operations/Screen Configuration/Title Bar)

The internal battery is a consumable part. When the time that a fully charged battery can be used becomes extremely short, 
replace the internal battery.
Replace the internal battery with a new internal battery.

The Intelligent Tester II uses a specially made internal battery. When it becomes necessary to replace the internal battery, 
please purchase a replacement battery and install it according to the replacement instructions.

Reference: Page 114 Battery Replacement (Chapter 7. Handling)

Internal Battery

Email: [email protected]  Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands