Denso Intelligent Tester II Operator'S Manual Download Page 123

Page: 123 / 136

7 Handling

- 114 -

This product uses a lithium ion battery. When replacing the battery, read the cautions below carefully and replace the battery
correctly and safely.

Battery Replacement

WARNING

Always observe the following rules. Failure to do so can result in heat generation, fire, blowout, or battery fluid

leakage.

Do not use any battery other than the lithium ion battery supplied by DENSO (95171-10341).

Do not heat or burn the battery.

Do not disassemble or alter this battery.

Do not short the terminals.

Do not use, charge, or leave the battery in any high-temperature location.

CAUTION

Correctly dispose of used-up batteries in accordance with legal requirements.

Email: [email protected] Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands

Denso Intelligent Tester II, Operator'S Manual

Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands