Denso Intelligent Tester II, Operator'S Manual

Page: 7 / 136

For safe usage
- iii -
Microsoft and Windows CE are trademarks or registered trademarks of the Microsoft Corp. of the United States in the
United States and other countries.
CompactFlash
TM
is a registered trademark of the SanDisk Corp. of the United States and is licensed to the CFA
(CompactFlash
TM
Association).
CAUTION
Do not leave this tester in any location subject to excessive heat for example in direct sunlight or inside a
car on a sunny day.
Do no touch any metal parts when connecting the test leads to the measurement position, even when
within the ratings range.
Do not work anywhere that water could come in contact with the equipment.
Do not drop this tester or subject it to a strong impact.
This could cause the liquid crystal leak from inside the tester.
A rash may result if the liquid crystal comes into contact with the skin.
If this happens, wash the skin with plenty of running water, then seek medical attention.
Block the wheels of the vehicle with chocks before carrying out work such as connecting the tester cable.
Failure to do so could result in an accident.
Do not pass the cable for this tester over the engine compartment while the engine is running.
An accident may result in cable, test lead, or clothing becomes caught in a belt or pulley.
When working anywhere not be easily visible, for example under the vehicle, always remove the key from
the ignition to ensure the vehicle cannot is not moved.
Failure to do so could result in an accident.
Do not work connect the tester cables etc. while the vehicle is running.
Doing so could result in an accident.
When working near the engine compartment, be careful of the engine and other high-temperature parts.
High-temperature parts can cause burns.
Trademarks
Email: sales@obd2express.co.uk Skype: obd2express.co.uk