Denso Intelligent Tester II Operator'S Manual Download Page 101

Page: 101 / 136

6 Measurement Functions

- 92 -

ACTIVE KEY

Voltage axis

enlargement

The waveform is enlarged vertically each time the button is touched.
The current voltage range is displayed at the top of the button.

Voltage axis

reduction

The waveform is reduced vertically each time the button is touched.
The current voltage range is displayed at the top of the button.

Time axis

enlargement

The waveform is enlarged horizontally each time the button is touched.
The current time range is displayed at the top of the button.

Time axis

reduction

The waveform is reduced horizontally each time the button is touched.
The current time range is displayed at the top of the button.

Executes calibration.

Reference: Page 93

Returns the display to the voltage display screen.

Saves/plays back/deletes screen images.

Reference: Page 94

Ends voltage measuremen.

CAL

Meter

Exit

Email: [email protected] Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands

Denso Intelligent Tester II, Operator'S Manual

Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands