manualshive.com logo in svg

Denso Intelligent Tester II, Operator'S Manual

Share
Download
Denso Intelligent Tester II Operator'S Manual Download Page 21

1  Before Use

- 12 -

CAUTION

Do not use devices other than the optional AC/DC adapter when charging the battery of the Intelligent 

Tester II.

Using other adapters may prevent battery charging, and cause heating of and damage to the charger.

Do not leave the AC/DC adapter plugged into the electrical socket after charging is complete.

Dust can build up between the socket and the plug and cause tracking and fire.

If the battery is charged while outside the usage temperature range, the battery indicator flashes.

Continued charging in this condition could damage the equipment, so discontinue charging.

Do not connect the AC/DC adapter to the Intelligent Tester II, when using the oscilloscope function.

NOTE

The Intelligent Tester II can be connected to the vehicle with the datalink cable to run off the vehicle 

battery when the tester internal battery is not charged.
In this state, the Intelligent Tester II internal battery will charge using the vehicle power, so take care not to 
run down the vehicle battery.

When using the Intelligent Tester II without connecting it to the vehicle (for example when using it as an 

oscilloscope), monitor the amount of power remaining in the battery and charge it with the AC/DC adapter 
when it runs low.
The onboard/offboard check screen can be used to check the amount of power remaining in the battery.

Reference: Page 25 Battery icon (Chapter 2. Basic Operations/Screen Configuration/Title Bar)

It is normal for the main unit of the Intelligent Tester II to heat up during charging.
The Intelligent Tester II may be left connected to the AC/DC adapter when the charging is complete. 

Email: [email protected]  Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands