manualshive.com logo in svg

Denso Intelligent Tester II, Operator'S Manual

Share
Download
Denso Intelligent Tester II Operator'S Manual Download Page 32

2  Basic Operations

- 23 -

1.

Turn the vehicle ignition switch OFF.

2.

Press the Intelligent Tester II power switch to turn the power OFF.

3.

Disconnect the datalink cable from the vehicle side datalink connector (DLC3).

Ending

CAUTION

If the power to the Intelligent Tester II is switched OFF during an active test, the actuator may remain in 

the drive state. Always end the active test before switching the power OFF.

CAUTION

When disconnecting the datalink cable from vehicle side datalink connector (DLC 3), gently pull it straight 

out of the connector.

Pulling the cable at a slant can break the connector pins.

When pulling the cable out, hold it by the connector section, and never by the cord section.

Pulling on the cord section can break the lines in the cable.

T0004

9

E

Email: [email protected]  Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands