Denso Intelligent Tester II Operator'S Manual Download Page 26

Page: 26 / 136

1 Before Use

- 17 -

If you purchased the optional cartridge with the built-in oscilloscope, it is necessary to replace the standard cartridge with
this cartridge.

Loosen the five screws securing the standard cartridge and remove the cartridge.

Replace the standard cartridge with the built-in oscilloscope cartridge, and secure it in place by tightening the five screws
to a torque of 0.5

0.1 Nm.

Connecting the Oscilloscope Cartridge

CAUTION

Always make sure the power to the Intelligent Tester II is OFF before replacing the cartridge.
When connecting the cartridge with the built-in to oscilloscope to the main unit, carefully check the

configuration of the connector and gently insert the cartridge straight in.

Inserting the cartridge at a slant can break the connector pins.

Be careful not to touch the connector section of the main unit or the cartridge with your hands.

000

Email: [email protected] Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands

Denso Intelligent Tester II, Operator'S Manual

Search results

Summary of Contents for Intelligent Tester II

Reviews:

Brands by name

Popular brands