manualshive.com logo in svg

Denso Intelligent Tester II, Operator'S Manual

Share
Download
Denso Intelligent Tester II Operator'S Manual Download Page 30

2  Basic Operations

- 21 -

2

Basic Operations

1.

Connect the Intelligent Tester II and vehicle side datalink connectors (DLC3) with the datalink cable.

Reference: Page 14 Connecting to the Vehicle (Chapter 1. Before Use/Connection)

2.

Turn the vehicle ignition switch ON.

3.

Press the Intelligent Tester II power switch to turn the power ON.

Starting and Ending 

Starting

NOTE

Communication with the vehicle computer (ECU) is not possible if the ignition switch is at OFF or ACC. 

When the Intelligent Tester II is turned ON, always switch the ignition switch ON or start the engine.

When the Intelligent Tester II is used as measurement function (voltage measurement, oscilloscope), it will 

work even if the ignition switch is at OFF or ACC.

If the Intelligent Tester II is connected to the vehicle’s diagnostic connector (DLC3) by a datalink cable and 

supplied with power via an AC/DC adapter or DC power cable for a cigarette lighter socket, the Intelligent 
Tester II can be operated even with its power switch turned off.

CAUTION

During startup, never switch the Intelligent Tester II power switch OFF until the onboard/offboard check 

screen is displayed.

T00043E

Email: [email protected]  Skype: obd2express.co.uk

Summary of Contents for Intelligent Tester II









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands