44
Setting the parameters and protocol
SET COM CONNECTOR
1:Parameter
2:Protocol
Selecting "1: Optical" or "2: Connector" on the SET
COMMUNICATION menu calls up each of the
screens as shown at left. The selected interface
port (OPTICAL or CONNECTOR) is shown on the
1st line of the LCD.
1 Parameter : Shifts to the parameter setting
screen (for selecting the transmis-
sion speed, character length, par-
ity, and stop bits).
2 Protocol
: Shifts to the protocol setting
screen (for selecting the serial
number, horizontal parity, RS/CS
control, timeout, and last space).
Reversed is the current setting.
Select a desired screen by using the numerical
keys or
* and
* keys, and then press ENT
key.
To return to the SET COMMUNICATION menu,
press C key.
SET COM OPTICAL
1:Parameter
2:Protocol
On the parameter setting screen ("1: Parameter" has been selected)
SET COM PARAMETER
1:Speed:
1200 2400 4800
9600
19200
38400
2:Data:7bits
8bits
3:Parity:
None
Odd Even
4:Stop:
1bit
2bits
Selecting "1: Parameter" on either of the above
screens (SET COM OPTICAL and SET COM CON-
NECTOR menus) calls up the screen as shown at
left.
Reversed is the current setting.
1 Speed :
Selects the transmission speed: 1200,
2400, 4800, 9600, 19200, or 38400 bps.
2 Data
:
Selects the character length: 7 bits or
8 bits.
3 Parity :
Selects the parity: none, odd, or even.
4 Stop
:
Selects the stop bit length: 1 bit or 2
bits.
Select a desired item by using the numerical keys
or
* and
* keys, and then select a desired
setting by using
* and
* keys.
To return to the SET COM OPTICAL or SET COM
CONNECTOR menu, press C key.
* For BHT-5000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of
,
,
, and
keys, respectively
